- New
Your motorsport parts store.
Nuke Performance CFC Unit Low Profile - Competition Fuel Cell Unit with Integrated Surge Tank
€702.07
Tax Included
Nuke Performance CFC Unit - Low Profile
Competition Fuel Cell Unit with integrated 2.0 l surge tank and pump hanger
| 2.0 l surge tank | 24-bolt pattern | AN-10 ORB outlet | Made in Sweden |
The Nuke Performance CFC Unit (Competition Fuel Cell Unit) replaces your fuel cell fill plate and combines a fuel pump hanger and a 2.0 litre surge tank in one unit. It removes the need for an external surge tank: all pumps sit inside the fuel cell, with fewer fittings, less weight and more safety. A lift pump on a height-adjustable mount keeps the internal surge tank full, while the high-pressure pumps feed the engine without starvation, for needs between 200 and 2,500 hp. This is the low-profile version, the lightest in the range.
Features
| Billet hanger for 1 or 2 high-pressure pumps: all 39 mm pumps plus Deatschwerks DW400, Walbro GST400 / GST450 / GST520, Bosch BR540 and Aeromotive Stealth 450. | |
| Lift pump on a height-adjustable aluminium mount inside the fuel cell. | |
| Oversized 6 mm electrical connectors: 3 for the high-pressure pumps (approx. 125 A each) and 2 for the lift pump; run the high-pressure pumps in two steps or simultaneously. | |
| Minimum mounting depth: 219 mm. For ATL Saver Cell or Fuel Safe cells with a smaller opening, choose the high-profile version. | |
| Replaces the fill plate on fuel cells using the standard 6x10" 24-bolt pattern (ATL, Premier, Pyrotect, Fuel Safe, Radium…). | |
| Single AN-10 ORB outlet combining the internal pumps into one line; AN-8 ORB return. AN-6 to AN-12 fittings available as accessories. | |
| Roll-over protected vent valve: AN-8 (3/4 UNF) with AN-6 male fitting included. | |
| Low-profile filler cap with integrated roll-over protection; remote filler neck for 50 mm hose available as an accessory (part no. 150-05-202). | |
| Accepts fuel level senders with the 5-bolt SAE pattern; supplied with a lightweight block-off plate and a spacer for asymmetric bolt patterns. | |
| Viton gasket, safe for all fuel types including alcohol fuels. | |
| Designed, developed and manufactured in Sweden by Nuke Performance. |
Technical specifications
| Integrated surge tank | Approx. 2.0 l |
| Mounting pattern | 6x10" 24-bolt |
| Minimum mounting depth | 219 mm |
| High-pressure pumps | 1-2 brushed pumps |
| Lift pumps | 1 brushed pump |
| High-pressure pump connectors | 3 x 6 mm (approx. 125 A each) |
| Lift pump connectors | 2 x 6 mm (approx. 125 A each) |
| Outlet | AN-10 ORB |
| Return | AN-8 ORB |
| Vent valve | AN-8 (3/4 UNF) |
| Length | 295 mm |
| Width | 194 mm |
| Weight | 1,934 g |
| Additional venturi kit | No |
| Fuels | Gasoline, methanol, ethanol, E85 |
| Manufacturer | Nuke Performance |
| Nuke part number | 150-05-201 |
Supplied without fuel pumps and without outlet or return fittings.
Kit contents
| 1 x Nuke Performance CFC Unit, low-profile version | |
| 2 x 1/4" BSPP to 8 mm male barb fittings | |
| 1 x 1/4" BSPP plug (for single high-pressure pump use) | |
| 2 x 39 mm inserts for the high-pressure pump bracket | |
| 1 x Viton gasket for 24-bolt fuel cells | |
| 1 x low-profile filler cap | |
| 1 x dual billet pump bracket and adjustable lift pump mount | |
| 1 x AN-8 (3/4 UNF) to AN-6 male vent safety valve | |
| 1 x FLS spacer for asymmetric bolt patterns | |
| 24 x 1/4-28 UNF x 1 bolts with nylon washers |
