- New
Your motorsport parts store.
Nuke Performance CFC Unit for Brushless Fuel Pumps - High Profile, with Integrated Surge Tank
€764.57
Tax Included
Nuke Performance CFC Unit for Brushless Fuel Pumps
High-profile Competition Fuel Cell Unit with 2.0 l surge tank and 6-pin connector
| 2.0 l surge tank | Brushless | 6-pin connector | Made in Sweden |
A version of the Nuke Performance CFC Unit (Competition Fuel Cell Unit) developed for brushless fuel pumps such as the Protec Cobra Compact and the Deatschwerks DW440 Brushless. It replaces the fuel cell fill plate and combines a pump hanger and a 2.0 litre surge tank, removing the need for an external surge tank. With variable-speed control of the brushless pumps, flow is matched to engine demand, reducing fuel circulation, electrical load and heat. It is a high-profile unit: it needs only 197 mm of depth and fits ATL Saver Cell and Fuel Safe cells with no modifications.
Features
| For 1 or 2 high-pressure brushless pumps: Deatschwerks DW440 and DW810, Protec Cobra Compact and other compatible pumps (Fuelab…). | |
| Delphi 6-pin bulkhead connector with Viton O-ring (6 points, approx. 30 A each): each brushless pump uses 3 pins to its external controller. | |
| 3 x 6 mm connectors (approx. 125 A each) for the lift pump: run one brushless lift pump or two brushed ones. | |
| Accepts 1 or 2 additional venturi kits, which help keep the surge tank full even at very low fuel levels. | |
| 39 and 42 mm inserts included for the high-pressure pump bracket. For traditional brushed pumps, Nuke recommends its other CFC Units with 6 mm connectors. | |
| Minimum mounting depth: 197 mm; fits ATL Saver Cell and Fuel Safe with no modifications. | |
| 60° angled remote filler neck also available as an accessory (part no. 150-05-205). | |
| Replaces the fill plate on fuel cells using the standard 6x10" 24-bolt pattern (ATL, Premier, Pyrotect, Fuel Safe, Radium…). | |
| Single AN-10 ORB outlet combining the internal pumps into one line; AN-8 ORB return. AN-6 to AN-12 fittings available as accessories. | |
| Roll-over protected vent valve: AN-8 (3/4 UNF) with AN-6 male fitting included. | |
| Low-profile filler cap with integrated roll-over protection; remote filler neck for 50 mm hose available as an accessory (part no. 150-05-202). | |
| Accepts fuel level senders with the 5-bolt SAE pattern; supplied with a lightweight block-off plate and a spacer for asymmetric bolt patterns. | |
| Viton gasket, safe for all fuel types including alcohol fuels. | |
| Designed, developed and manufactured in Sweden by Nuke Performance. |
Technical specifications
| Integrated surge tank | Approx. 2.0 l |
| Mounting pattern | 6x10" 24-bolt |
| Minimum mounting depth | 197 mm |
| High-pressure pumps | 2 brushless pumps |
| Lift pumps | 1 brushless (or 2 brushed) |
| High-pressure pump connector | 6-pin bulkhead (approx. 30 A per pin) |
| Lift pump connectors | 3 x 6 mm (approx. 125 A each) |
| Outlet | AN-10 ORB |
| Return | AN-8 ORB |
| Vent valve | AN-8 (3/4 UNF), with AN-6 male fitting |
| Length | 295 mm |
| Width | 194 mm |
| Weight | 2,254 g |
| Additional venturi kit | Yes, 1-2 kits |
| Fuels | Gasoline, methanol, ethanol, E85 |
| Manufacturer | Nuke Performance |
| Nuke part number | 150-05-204 |
Supplied without fuel pumps, controllers or outlet and return fittings.
Kit contents
| 1 x Nuke Performance CFC Unit, high-profile version for brushless pumps | |
| 1 x Delphi 6-pin bulkhead connector with Viton O-ring | |
| 2 x female 6-pin connectors | |
| 2 x 1/4" BSPP to 8 mm male barb fittings | |
| 1 x 1/4" BSPP plug (for single high-pressure pump use) | |
| 2 x 39 mm inserts for the high-pressure pump bracket | |
| 2 x 42 mm inserts for the high-pressure pump bracket | |
| 1 x Viton gasket for 24-bolt fuel cells | |
| 1 x low-profile filler cap | |
| 1 x dual billet pump bracket and adjustable lift pump mount | |
| 1 x AN-8 (3/4 UNF) to AN-6 male vent safety valve | |
| 1 x FLS spacer for asymmetric bolt patterns | |
| 24 x 1/4-28 UNF x 1 bolts with nylon washers |
