- New






Your motorsport parts store.
TWIN-ADJUST-PROJEKT TIEF coilover kit for the VW T5, T6 and T6.1 without DCC: height adjustable from -50 to +90 mm, extra-low design, rebound-adjustable KONI dampers and Eibach springs. TÜV report included.
Height-adjustable coilover from -50 to +90 mm, extra-low design and rebound-adjustable KONI dampers
| -50 to +90 mm | Adjustable rebound | Eibach springs | TÜV report |
Fully height-adjustable coilover kit for the VW T5, T6 and T6.1 without DCC, with an extra-low design: it adjusts from about -50 mm to +90 mm at the front and rear axles. It is aimed at drivers who value those last 20 mm of extra drop more than maximum comfort.
Each damper has proven mechanical rebound adjustment, set with the damper removed: you can make it sportier before fitting, change it later whenever you like, or adjust only the rear axle. The dampers are made by KONI to Twin-Monotube-Projekt specifications, with a comfort base setting and more bump travel at the front, and the springs are made by Eibach.
| Ride height adjustable from approx. -50 to +90 mm, front and rear. | |
| Extra-low design for maximum drop. | |
| Adjustable rebound on each damper, with the damper removed. | |
| KONI dampers made to specification, with more bump travel at the front. | |
| Eibach springs developed for the Twin-Monotube-Projekt. | |
| TÜV report (Teilegutachten) included. |
| T5 / T6, clamp fixing at the front axle (ref. TMP-TA-TIEF). | |
| T5 / T6, band clamp fixing at the front axle (ref. TMP-TA-T32-TIEF). | |
| T6.1, clamp fixing at the front axle (ref. TMP-TA-TIEF-T6.1). | |
| T6.1, band clamp fixing at the front axle (ref. TMP-TA-T32-TIEF-T6.1). |
| Vehicle | VW T5, T6 and T6.1 without DCC |
| Height adjustment | Approx. -50 to +90 mm, front and rear |
| Dampers | KONI, rebound adjustable (when removed) |
| Springs | Eibach |
| Documents | TÜV report (German) |
| Brand | TWIN-MONOTUBE-PROJEKT / KONI |